ati@airtechnical.com

1 (888) 857-6265

EXTRA LARGE, HEAVY DUTY HI-LIFT SCISSOR DECK

EXTRA LARGE, HEAVY DUTY HI-LIFT SCISSOR DECK

XL Lifting Capacity Reaching New Heights

Mentor, Ohio May 26, 2017 – Air Technical Industries (ATI) announces the development of a new, extra large double scissor lift platform with a 10,000 lb capacity.  It lifts from 48 in lowered height, 210 in vertical lift and maximum raised height of 258 in.

The scissor mechanism is manufactured from heavy duty rectangular tubing for sturdy, smooth lifting, and robust side-to-side stability, with 3:1 structural safety factor.

Lifting is actuated by four hydraulic cylinders with precision built cylinder body and smooth inner walls equipped with durable urethane seals.  The 2 in OD cylinder shaft is made of high carbon tough steel.  The shafts are chrome plated for smooth operation and to prevent corrosion.

The non-skid deck is available with optional railings on all sides with a gate on each end or two-sided with safety chains.  The deck size is 102 in wide by 168 in long with flexible platform sizes and lifting heights available.  A telescoping deck extension feature  is also available to provide added reach.  The deck extension is hydraulically actuated for smooth, effortless operation.

The unit shown is stationary for permanent installation.  Optional mobile units are available wheel mounted, towable or also self-propelled walkie or rider type, as well as self-contained drive with remote joystick controls.  When the unit is installed on wheels there are optional outriggers that may be necessary for added stability.

There are a variety of power options that can be used for stationary installation primarily electrical 240-480 volt 3 phase.  Mobile units can be deep-cycle or industrial battery DC powered, propane engine or gasoline engine.  For hazardous duty environments there is an air powered hydraulic system that is spark proof.

This is an ideal, versatile, and economical way of lifting large heavy items to greater height while the mobility provides additional flexibility to be used any time or place needed.

X          X          X

See Double Scissors Lift models here.

 

Comments (1) Industrial Equipment, News

Read more

NEW COMPACT DRIVE ON POPULAR HUSKY MASTER FLOOR CRANE

NEW COMPACT DRIVE ON POPULAR HUSKY MASTER FLOOR CRANE

Powerful Lift in a Compact Package

Mentor, Ohio April 28, 2017 – Air Technical Industries (ATI) announces the development of a new, compact drive system that is smaller in size and more powerful with infinitely variable speed control and automatic braking when the control handle is released.  The steering is 90° left and 90° right making sharp turns on a dime for operating in tight areas and precision positioning of the load.

The unit is light, compact and is available with adjustable legs that adjust from narrow 34 in and up to 60 in wide when lifting to 12 ft height for stability.  Other options include hydraulically powered telescopic boom extending from 54 in out to 96 in long.

Powered cable lift is also available to be able to reach up to 25 ft below floor levels into utility holes or from a second floor it can lift up from the lower level.

The Super Master variation offers the additional feature of mast rotation with outriggers.

The unit is available in 2000, 4000 and 6000 pound capacities.  The large wheels are roller bearing mounted polyurethane-coated, for smooth, quiet operation and to protect the floor.

Lifting and telescopic boom action is hydraulically actuated and the drive system is electo-mechanical battery powered 24 volts DC.  A built-in charger is available to make the unit completely self sufficient.

The Husky Master is a handy flexible tool where heavier loads need to be lifted, positioned and transported with effortless finger tip controls making the job easier and safer.

 

X          X          X

See Husky-Master models here

Comments (1) Industrial Equipment, News

Read more

NEW MOBILE REVERSIBLE CRANE WITH TRIPLE SECTION BOOM

NEW MOBILE REVERSIBLE CRANE WITH TRIPLE SECTION BOOM
Reaching In, Over, Above and Beyond

Mentor, Ohio March 16, 2017 – Air Technical Industries (ATI) announces the development of a new, heavy duty mobile reversible crane with a unique triple section powered telescoping boom.  The RBC-20000SPBW-TSB offers the user many unique benefits with its mobility, portability and compact, narrow design, yet delivers big on lifting capacity and height. 

The cylinders are built inside the boom for protection and to make the unit have a modern, slick, appearance.  This heavy duty crane can go where no other crane can go, because of its narrow width of 60” and exceptional mobility with 90° powered steering to the left and right so that the large crane can turn on the proverbial dime.

To add to the uniqueness and versatility, the crane has infinitely variable finger tip speed control.  It can go so slow so that you can not see it move like a foot per minute for precise positioning around aircraft or other sensitive equipment and then it can speed up to 4 miles per hour to get where it needs to go. The crane has smooth acceleration and deceleration to prevent swinging a load and an automatic parking brake that engages when the crane is brought to a stop.

The crane has 168” long boom with 240” telescopic capability out to 408” height and then it has optional fold-able jib extension 96” long giving it a total of 504” boom reach.  At 70° boom angle, it can reach the height of 540” high into the sky.  An optional hydraulic cable winch with anti-two-block safety feature is also available.

The unit is powered by a 48 volt large industrial battery and is suitable for indoor and outdoor operation.  It operates smooth and quiet and is self-sufficient with built in battery charger.  Mobility is provided with large and wide polyurethane wheels, that  are roller bearing mounted for easy and quiet mobility and to protect the floor.

The controls are push button pendant remote controls with a 40 ft long cord to give the operator agility and flexibility to control the lifting and telescopic action.  The operator can be positioned where the load is to precisely pin point the assembly.

The lifting and telescoping boom action is hydraulically operated with overload protection and safety relief valves built in. The cylinder shafts are chrome plated for smooth operation and to prevent corrosion.  The crane is equipped with two electric motors and hydraulic pumps to enable increased lifting speed and provide added assurance for continued operation in case one pump or motor fails.

The RBC cranes are available in smaller size and lighter capacities which include 1000, 2000, 3000, 4000, 6000, 10,000 and 15,000 lb.

This crane is an ideal tool to help increase productivity, improve safety and make the job easier, safer and faster.

 

 X          X          X

See Heavy-Duty RBC models here

Comments (1) Industrial Equipment, News

Read more

NEW SKY-RISER, MOBILE HYDRAULIC CRANE

NEW SKY-RISER, MOBILE HYDRAULIC CRANE

Reaching New Heights yet Rugged, Compact and Portable

Mentor, Ohio January 19, 2017 – Air Technical Industries (ATI) announces the development of a new, top notch lifter that is an economical alternative to help raise productivity and profits.  The Sky-Riser offers a variety of unique, versatile features which include:  vertical telescopic mast action, powered boom rotation, telescopic boom, 12 ft longer goose-neck attachment for higher lift and further reach, adjustable straddle for narrow passage thru doorways/aisles, and tow bar steering with 90° swing to left and right for sharp turns and precise positioning.  The unique telescopic outriggers are 120” wide for stability when lifting to the sky and are retracted when not needed.

The crane is equipped with large foam-filled pneumatic tires for outdoor use on rough gravel.  All the features of the large crane can be folded into a smaller package for strategic deployment and fast transport to any location.

The crane can be easily disassembled by removing the two legs with tires, the boom is removed and the adjustable stabilizers are caster equipped so the crane mast with the base is mobile even in its disassembled condition.

The vertically telescopic mast provides higher reach over obstacles and lowers for easy passage through the doorway and loading on a truck for transport.  The adjustment is from 88” up to 126” mast height.

The Sky-Riser Mobile Crane lifts up to 4000 lb with the boom retracted to a height of 20 ft.  With the boom telescoped out, it lifts 1000 lb up to 30 ft height.  With the goose-neck attachment in a straight out position it will lift 500 lb to 40 ft height and with the goose-neck attachment  set at 45° angle the unit will reach up to 14 ft beyond the wheels and a height of 36 ft.

The power mast rotation is equipped with telescopic outriggers and the rotation is limited to 45° left and 45° right.  All the powered features are hydraulically operated action and include the boom lift, telescopic boom, vertical mast lift and the mast rotation.

The power source available is 110 volt AC single-phase, 240-480 3-phase, battery powered, gasoline, diesel engine, and propane operated.  For hazardous locations, spark proof air power is also available.

Controls are mast-mounted manual spool valves or push button remote pendant to help the user be where they need for precise positioning of the load or parts.

Take your pick:  Options available are powered cable lift, telescopic outriggers, walkie or rider style self propelled drive, operational safety amber light, and custom goose-neck attachment can be made to suit the user’s needs.
The Sky-Riser will help to speed up maintenance work on aircraft or construction applications with all new versatility in assembly work to increase productivity and mobility at a lower cost.  It is an ideal tool where portability and higher lifts are required.

 

X X X

For more information, Contact Us

View Sky-Riser specs here

Comments (0) crane, Industrial Equipment, News

Read more