ati@airtechnical.com

1 (888) 857-6265

Hydraulic Knuckle Krane

Truck Mounted Knuckle Crane

The hydraulic KNUCKLE KRANE is available in 2000, 4000, and 6000 lb. capacities with powered options.

The heavy-duty hydraulic truck mounting crane can revolve 360° on its vertical axis. The unique knuckle boom with telescopic extension makes this crane extremely versatile. It can reach over, beyond, and beneath its own base mount.

This articulating unit is able to load, lift, and precisely position awkward loads of parts, cartons, pallets, or lay pipes into pits safely and efficiently.

The push button remote control permits the operator to be with the load to line it up precisely or be away from the unit yet have full control at his fingertips.

Fully extended boom reach is 144″ on KK-2000, 172″ on KK-4000, and 200″ on KK-6000, with a maximum lift height 16′ on KK-2000, 19′ on KK-4000, and 20′ on KK-6000 units.

All functions of the crane: A) Boom Lift, B) 360° Rotation, C) Knuckle Action, and D) Telescopic Boom Action are hydraulically operated for smooth efficient operation.

The power may be electric 110V or 230/460V 3-phase, gasoline engine, or by truck engine via PTO power take off.

This crane is built of heavy duty welded steel construction for industrial or construction use. Many times cranes are used in assembly lines for heavy installations, machine loading, feeding, heat treating, forging, and most of the time for truck loading and unloading. This is an efficient piece of equipment at an affordable price.

Comments (0) News

Read more

Three-axis, Heavy-Duty, Industrial Manipulator

Super-Master with Manipulator

A highly versatile, flexible, and easy to operate manipulator has been developed by Air Technical Industries in Mentor, Ohio at a 90% savings over robots that perform similar tasks. It is ideal for lifting, positioning, or manipulating awkward loads in hard to reach areas in an industrial environment without the technical ability required for robots.

The lifting force is electric/hydraulic powered by 110V single phase, or 220/440V 3-phase. Electric motor driven hydraulic pump is built into the head housing and is equipped with an overload relief valve..

The unit is base-mounted, but can be ceiling mounted upside down, or carriage mounted for complete mobility

The three-axis articulated arm moves freely in a three dimensional space. Capacity is 1000 lbs. and the arm is capable of reaching out 144″ and lifting from ground level up to 72″ high. The jointed arm is equipped with special roller bearings to allow for smooth, quick, effortless operation. As an option, the unit has a three axis wrist movement that allows for additional manipulation within the three-dimensional envelope.

Each movement is of modular design and can be configured in a variety of combinations. They include: —-Wrist Pitch: 90° for lifting parts or flat sheets to a vertical position
—-Wrist Roll: 180° with 90° left and 90° right rotation on a horizontal plane.
—-Wrist Yaw: 180° provides rotation of wrist or end effector on a vertical axis.

The New Crane Mounted Manipulator is a safe, yet economical method of lifting or positioning heavy loads safely, quickly, and efficiently without fear of employee injury. The applications are endless: machine loading, assembly work, crating, packing, unpacking, turning, up-ending cabinets or boxes and lifting plates of glass or awkward metal products.

Comments (0) News

Read more

Mini Articularm with Omni-directional Wheel System

Air Technical Industries of Mentor, Ohio and OMNIX International Corp. jointly announce the development of a new product consisting of the six-axis Mini-Articularm built by Air Technical mounted on top of the omni-directional platform built by OMNIX.

Omni-directional Mini-Articularm

This unique combination adds great versatility to the proprietary products of both companies to offer the user ultimate flexibility in the most unusual and challenging process of lifting, handling, positioning, transporting, assembling, stacking, loading and unloading operations. The unit will also be ideal for handling explosive, toxic or nuclear materials as well.

All the functions for mobility and articulation can be controlled via corded push button remote controls, joysticks or through a wireless radio frequency controller. These systems allow the operator to be a substantial distance away from a hazardous or inaccessible area.

The NEW highly versatile Mini-Articularm is the link between conventional handling equipment and expensive robotics systems. It gives the operator full manipulation capable of handling 100 pounds to 250 pounds at a 72″ radius. This allows for complete dexterity without the physical effort of lifting, stretching and straining to protect the operator from the danger of injuries.

The parallelogram arm allows the load to remain parallel to the ground while being raised or lowered. The unit also rotates 360-degrees and is manually operated; powered rotation is also available. The forearm attached to the parallelogram arm swings horizontally from twelve inches away from the mast out to a 72″ radius making a 144″ diameter circle. It can lift from ground level up to 72″ high.

The vertical lifting arm provides 360-degrees wrist rotation that carries the end effector or tools needed for a particular job. The end effector can be equipped with three-axis articulation: pitch, roll and yaw. The end effector can be equipped with a variety of tools, grippers, shovels or scoops. All of the functions are hydraulically operated and battery powered. For industrial applications, it can be electrically powered via 110 volt AC or 220/440 volts 3 phase.

The mobility is provided by a very unique and unparalleled Omni-Directional Platform, which allows the unit to travel in any direction desired to provide maneuverability in a tight spot and precise positioning.

The omni-directional transporter has a variable speed control for smooth acceleration and deceleration, and can climb up to a 20-degree incline. With the portable joystick control, the operator can position the unit in any desired location. The omni-wheel clearly demonstrates superior mobility compared to any other undercarriage ever designed.

With the wide variety of accessories and attachments, six-axis manipulation and omni-directional mobility, the unit can be used for a great variety of applications such as:

  • Automotive assembly      
  • Assembly of electronic panels
  • Machine assembly
  • Machine loading
  • Glass & delicate parts handling
  • Packing & unpacking   
  • Cargo handling  
  • Spot welding
  • Lifting & dumping containers
  • Luggage handling         
  • Drilling operations
  • Feeding hoppers
  • Military & Security industries   
  • Feed forging press
  • Handling explosives  
  • Aircraft service      
  • Casting & core setting
  • Handling toxic & nuclear materials

Comments (0) News

Read more

New Mobile Barrel Lifter-Dumper

Husky-Master Mobile Barrel Lifter-Dumper

Comments (0) News

Read more

Omni-Directional Scissor Lift Tables

Omni-Directional Scissors Lift Table

Announcing all models of hydraulic scissor lift tables now available with omni-directional mobility.  Capacities are available from 500 lbs. to 10,000 lbs. with deck sizes as small as 24″ x 36″ up to 72″ x 120″ with vertical lifts up to 160″. Optional rubber bumpers are available for the corners of the table to protect nearby objects from collision damage.

Lifting is hydraulically operated and battery or electric AC powered. The controls are pendant remote control or radio remote control and it can be equipped with GPS for remote distance positioning capabilities.

Mobility is provided by a very unique omni-directional undercarriage which allows the unit to travel in any direction desired to provide maneuverability in a tight spot for precise positioning in hard to reach places.

The mobility is variable speed from 0 to 4 MPH and is controlled via a joystick. The Omni-wheel provides superior mobility over any other undercarriage ever designed.

Units equipped with a camera can be controlled by the operator from a secure place to transport dangerous, toxic, explosive, or flammable materials or armaments.

Designed for national defense applications as well as departments of energy and many other industrial, commercial, and security force uses.

Comments (0) News

Read more

Self-Propelled, Stand-Up-Rider Hydraulic Crane

Rider-Type Reversible Boom Crane

Air Technical Industries of Mentor, Ohio announced the introduction of its NEW, versatile, self-propelled, rider-type, hydraulic crane. Its boom length is telescopic from 72″ to 120″, angles up to 60°, and has a maximum reach beyond its base of 82″. The units maximum lifting height is 15 feet. The boom can swing 45° left and right and comes equipped with stowable outriggers. Unit lift capacities are from 1,000 to 20,000 pounds. The propulsion is a 24V DC battery system that is fully self-contained, smooth and quiet. It has variable speed controls and can travel up to 4 mph. It is designed to be extremely maneuverable & versatile.

Extraordinarily compact, the overall width of the unit is only 34 inches for improved handling versatility and easy passage through doorways, narrow aisles, and between machinery. The steering is powered for effortless operation turning up to 60° to either side for a small turning radius in crowded areas of operation. Lifting action, as well as telescopic boom action and boom swing is hydraulically operated. The unit can be easily transported, the boom is removable for compactness and can be reattached quickly for operation.

An optional, hydraulically operated wire rope winch is available for working into manholes or any other below ground operation. The unit is equipped with an overhead guard for the operator’s safety and has a dead-man brake as standard equipment.

Air Technical Industries’ equipment has heavy steel construction and it is quality built for years of trouble-free performance in tough industrial working conditions. A high performance design at a low cost, it will increase productivity, save time, improve safety and make impossible tasks possible.

Comments (0) News

Read more

Mini-Scissor Lift Table

NEW MINI-LIFT TABLE, ELECTRO-MECHANICALLY OPERATED

Mini Scissor Lift announcement

A new miniature series of lift tables has been developed by Air Technical Industries of Mentor, Ohio. The unique and compact lift table lowers down to 4″ and is electro-mechanically operated. The gearbox-driven screw lifts gently, smoothly, and firmly up to 250 pounds of load.

The small scissor lift featured in the picture is 15″ wide x 19″ long x 4″ lowered height and it lifts up to 16″. Other sizes are available from 18, 20, and 24 inches wide and 24, 30, 36, and 48″ in length, and vertical lift from 12″ up to 32″ in height.

Power source can be 12 or 24 volt DC battery operated or 110 volts single phase. Rocker switch remote control, and optional adjustable limit collars are available.

The construction is welded structural steel. It is also available in stainless steel and aluminum construction for non-corrosive applications or where lighter weight may be needed.

Comments (0) News

Read more

Telescopic Mast Jib Crane

Telescopic Mast Jib Crane

The New Telescopic Mast Jib Crane was developed by ATI at Mentor, Ohio. The unique Jib Crane has a hydraulically operated mast that serves a dual purpose where the beam has to rotate under obstructions or reach into a cavity to pick up a load; then it rotates and can raise to higher levels over those obstructions. It can operated without a hoist or additional expense of electric wiring. Because it can be operated with a sling and trolley on the beam, it can work in hazardous, hot or corrosive environments.

The 360-degree manual rotation provides agility and versatility in on-the-spot handling. The hydraulic system can be electrically powered by 110 volt AC, 220/440 volt 3-phase, or air powered for hazardous areas. The control for lifting and lowering is remote push button on pendant for operator convenience.

These units are available in capacities of 500, 1000 & 2000 pounds. Beam reach from 6′ to 12′ and lifting height from 6′ to 20′.

The new Telescopic Jib Crane will help to increase efficiency, save time and improve safety in the handling of unusually challenging tasks.

Comments (0) News

Read more

Mobile Articularm with Unique Attachment

Mobile Mini-Articularm with Unique Gripper

Air Technical Industries of Mentor, Ohio announces the development of a NEW mobile Articularm manipulator with a unique attachment that allows gripping and rotating 360 about the vertical and horizontal axes.

The Articularm has a 72″ reach and 72″ of vertical lift. The mast also has 360 rotation and the forearm rotates up to 270. A counterweight is provided for stability and effortless lifting of loads up to 250 pounds. Units are available electrically operated 110V AC or 12V DC battery powered.

Mobility for the unit is provided by a platform truck 42″ wide by 72″ long. It rolls smoothly on roller bearing mounted wheels and is equipped with floor locks and push handle bar.

This unit can be used any time and any place without installation and it is an ideal tool for lifting, handling, positioning, complex articulating, assembly, and feeding operations. Increase safety and worker productivity by having the lift do the lifting instead of the worker.

Comments (0) News

Read more

Reversible Boom Crane with Knuckle Boom

NEW COMBINATION KNUCKLE TELESCOPIC BOOM ON REVERSIBLE BOOM CRANE

Reversible Boom Knuckle Crane

With the development of the new Reversible Boom Crane (RBC) with Knuckle Boom combination ATI now offers one of the most versatile pieces of handling equipment in the industry. The very narrow tracks of the self propelled counterweighted crane makes it accessible in very narrow aisles and crowded areas. The knuckle boom can reach into nooks and crannies; over, under, above and beyond obstacles where no other piece of handling equipment could ever go before!

The self-propulsion is a variable solid state speed control that can go as slow as one foot per minute and then accelerate up to 4 MPH. The steering capability is 90° to each side, so that it can practically turn on a dime.

The knuckle boom gives the RBC a whole new perspective allowing it to reach further and closer than ever. It can pick up loads as close as 18” from the base and reach out 200” from the base. It can lift loads from 48” below ground level, from pits, holes, or lower levels of a building and rise up to 200” above ground level.

The boom has double knuckle and telescopic sections. Lifting and telescoping action is all hydraulically operated. Available capacities vary from 1000lbs to 20,000lbs. Powered mast rotation is available as an option for additional versatility; mast rotation comes with telescopic outriggers for stability.

Another versatile option is the hydraulic powered cable winch. It can lower a load up to 100’ below the hook into a man hole, to a lower level, or from the top of a building several stories high to ground level.

The unit is completely self-sufficient battery operated 24V DC with available battery charger. It provides smooth, quiet, and clean ergonomic operation. All the controls are push button on the control handle. Optional remote control pendant is available.

This is one of the most versatile handling tools for when a variety of different loads need to be lifted, articulated, and positioned, such as assembly work, machine loading, repair & maintenance work, construction, aircraft maintenance, etc. This unit is an ergonomic tool that will improve safety, take loads off workers’ bodies and at the same time increase efficiency and productivity by saving time. If you could only have one crane in your shop, MAKE IT THIS CRANE.

Comments (0) News

Read more