ati@airtechnical.com

1 (888) 857-6265

EXTRA LARGE, HEAVY DUTY HI-LIFT SCISSOR DECK

EXTRA LARGE, HEAVY DUTY HI-LIFT SCISSOR DECK

XL Lifting Capacity Reaching New Heights

Mentor, Ohio May 26, 2017 – Air Technical Industries (ATI) announces the development of a new, extra large double scissor lift platform with a 10,000 lb capacity.  It lifts from 48 in lowered height, 210 in vertical lift and maximum raised height of 258 in.

The scissor mechanism is manufactured from heavy duty rectangular tubing for sturdy, smooth lifting, and robust side-to-side stability, with 3:1 structural safety factor.

Lifting is actuated by four hydraulic cylinders with precision built cylinder body and smooth inner walls equipped with durable urethane seals.  The 2 in OD cylinder shaft is made of high carbon tough steel.  The shafts are chrome plated for smooth operation and to prevent corrosion.

The non-skid deck is available with optional railings on all sides with a gate on each end or two-sided with safety chains.  The deck size is 102 in wide by 168 in long with flexible platform sizes and lifting heights available.  A telescoping deck extension feature  is also available to provide added reach.  The deck extension is hydraulically actuated for smooth, effortless operation.

The unit shown is stationary for permanent installation.  Optional mobile units are available wheel mounted, towable or also self-propelled walkie or rider type, as well as self-contained drive with remote joystick controls.  When the unit is installed on wheels there are optional outriggers that may be necessary for added stability.

There are a variety of power options that can be used for stationary installation primarily electrical 240-480 volt 3 phase.  Mobile units can be deep-cycle or industrial battery DC powered, propane engine or gasoline engine.  For hazardous duty environments there is an air powered hydraulic system that is spark proof.

This is an ideal, versatile, and economical way of lifting large heavy items to greater height while the mobility provides additional flexibility to be used any time or place needed.

X          X          X

See Double Scissors Lift models here.

 

Comments (1) Industrial Equipment, News

Read more

Customer finds lifting solution with ATI’s Zero-Low Three Point Entry

A customer in the Northeast turns to ATI for solution. They needed a lifting device to lift 50 pound bags of product up 80 inches to a mezzanine and to the operator. They wanted to roll a cart full of these 50 pound bags from one side and have the operator be able to remove them from an adjacent side.

ATI turns to one of its standard product lines, the Zero-Low Three Point Entry lift table. A standard Zero Low would need to be 90-plus inches long and the customer did not have that much room. With some minor modification ATI was able to meet what the customer needed. With the addition of guardrails, chains, and holding valves the unit was safe for the operator to step on.

The Zero-Low Three Point Entry is easiest to use lift table of all time! ATI’s 3-Point Entry, Zero-Low Lift Table permits the load to be placed on the table from three sides and raised close to the operator. 1,000 & 2,500 lb. capacities, up to 48 in. lift height. Loads can be placed on the table from three sides providing easier access by operator. A wide variety of deck sizes available to fit any size load. Double roller lifting chains give maximum lifting stability. Lifting table travels on rollers eliminating rubbing, friction and binding. Rollers are adjustable; level lifting is maintained at all times. Manual, electric, or air-over-hydraulic operation is available.

http://www.airtechnical.com/product/zero-low-3-point-entry-lift-tables-2/

Zero-Low 3-Point Entry Lift Table

Comments (0) Industrial Equipment

Read more

Company turns to Air Technical Industries for solution and cost savings

Customer has an application that requires above normal lifting heights. They went out and got quotes for modified scissor lift tables and they were coming back over $20,000. ATI found a more stable and safer answer to their problem.

The customer was looking to lift mixing materials for their mixer that the opening sits 193 inches above the floor. They have an operator that stands on a platform and dumps these components into the mixer. However, they want to run these items on a conveyor and transfer them up to him. The solution is ATI’s Zero-Low 3 Point Entry lift table. They can access the lift from 3 sides giving them tremendous flexibility. By attaching gravity conveyors to the Zero Low 3 point they are able to feed the unit from their current conveyors to the platform and lift up to the operator. Once he is done loading the mixer the platform will return to the home position waiting for another load to be delivered. The customer ending up saving over $6,000 per unit.

The Zero Low 3 Point Entry lift table is the easiest to use lift table of all time!ATI’s 3-Point Entry, Zero-Low Lift Table permits the load to be placed on the table from three sides and raised close to the operator.

  • 1,000 & 2,500 lb. capacities
  • Loads can be placed on table from three sides providing easier access by operator
  • Wide variety of deck sizes available to fit any size load
  • Double roller lifting chains give maximum lifting stability.
    Lifting table travels on rollers eliminating rubbing, friction and binding. Rollers are adjustable; level lifting is maintained at all times.
  • Manual or electric operation

zl3p-box

http://www.airtechnical.com/product/zero-low-3-point-entry-lift-tables-2/

Comments (0) Industrial Equipment

Read more