ati@airtechnical.com

1 (888) 857-6265

Extra Large Lift & Tilt Table

A customer that manufactured the cardboard cores that would go inside rolls of paper was looking for an ergonomic way to tilt these rolls in the cutting process. When the rolls are made they are made in lengths of up to 20 feet long and then are cut down to sections of 5 feet or smaller. We manufactured a a custom tandem lift and tilt table that was 7 feet wide by 21 feet long and would tilt up to 15 degrees. The table was equipped with sockets on all for corners to secure the crate that was set on top of it. As the table was tilted it would easily allow for the cores to slide off the platform. This task was originally done by and overhead crane & because of safety concerns, the mis-application of the overhead crane, and not tying up the overhead crane time, they changed to a safer and ergonomic way to handle the application.

Lift-and-Tilt Tables

 

Extra Large Lift & Tilt

>

Comments (0) Industrial Equipment

Read more

Your Overhead Crane Does Not Handle Everything

A customer in the paper industry was looking for an ergonomic way to tilt their cardboard cores for their paper reels allowing them to easily remove them from the stack. The cores came in up to 20′ in length stacked up twelve high and weighing about 10,000 pounds altogether including the crate. They were originally tilting the containers using an overhead crane. This is a mis-application of an overhead crane, and a significant safety hazard to the operators. We custom designed for them an extra-large 7 ft x 20 ft triple tandem scissors lift table with a tilting top platform. The lift table was capable of lifting up to about 6′ high and had a working capacity of 10,000 lbs. You can see the standard design for this model of lift and tilt table at http://www.airtechnical.com/product/zero-low-lift-tilt-tables/

 

Lift & Tilt Table

Comments (0) Industrial Equipment

Read more